ICX7xxx Licensing
For the ICX7xxx series, no actual licenses are required. Around the release of FastIron v8060, they enabled honor-based licensing. This means you can simply install and unlock a valid license yourself with the license install command. That's it! Congratulations Ruckus, you did it. Just be sure to be running the recent firmware from this guide first.
If you are using these switches in a commercial environment, or to otherwise turn a profit, you should really purchase a license entitlement from Ruckus - it's only fair!
License The ICX7150-C12P
Run the following to unlock all the features of the ICX7150-C12P:
enable
license install perpetual 1 2x10gr
conf t
int e 1/3/1 to 1/3/2
no speed-duplex 1000-full
exit
write mem
exit
reload
License The ICX7250
Run the following to unlock all the features of the ICX7250:
enable
license install perpetual 1 8x10g
license install perpetual 1 l3-prem
conf t
interface ethernet 1/2/1 to 1/2/8
no speed-duplex 1000-full
exit
write mem
exit
reload
License The ICX7450
Run the following to unlock all the features of the ICX7450:
enable
license install perpetual 1 l3-prem
license install perpetual 1 macsec
write mem
reload
License The ICX7750
Run the following to unlock all the features of the ICX7750:
enable
license install perpetual 1 l3-prem
write mem
reload
Other ICX7xxx Models
If you have a 7-series switch not listed here and would like to license it, ensure you're at the enable CLI level. Then just type in license install perpetual 1 and hit tab a few times, it will show all the auto-complete options (license options). Just run the license install command above for every one of them, same as for the switches above. Then just write mem and reload